HomeContactsRequestsDownloadsSearchNewsletter
MARKETSPRODUCTSABOUT USInvestorsNewsSales ContactsJobsMedia centre
RF product search
RF Products
Fiber Optic Products
Wire + Cable Products
Product Search
RF Product Search
RF Coaxial Cables
RF Cable Connectors
RF Panel Connectors
RF Print Connectors
RF Adaptors
RF Attenuators
RF Terminations
Lightning / EMP protectors
Antennas Product Search
Wire + Cable Product Search

Print viewCoaxial terminations online data base
Item details  
Item description6506.19.B  
Picture 6506.19.B
Termination DescriptionStandard Termination, Medium Power
Series / Configuration
Highlights		• SMA (f) – Type


 
Item number22550256
Data sheetFile size: 63.3 kB   
Outline drawingFile size: 24.6 kB 
Interface Standard1IEC 60169-15;   MIL-STD-348A/310;   CECC 22110
Important note  WARNING: Beryllia Ceramic Inside! 

DO NOT sand, scrap or tamper with. Dispose in accordance with all relevant regulations. Details see section material.
PhaseProductionPublication StatusWWWPublished on INTERNET for public information
Electrical dataJump to [Top] 
Nominal Impedance1Interface SMA - jack (female)50
Average Power to 40 °C ambient temperature
linearly derated to 0 W at 130 °C ambient temperature Graph see below		6W
Power Rating Remarks8 watt at max 20°C. Convection cooled. 
Peak Power during max. 5 µs1000W
Frequency range Frame 0 to 12.4GHz
    VSWR Frame ≤ 1.25 
    Return Loss Frame > 19.08dB
Detail values
Frequency Range 10 to 1GHz
    VSWR1≤ 1.05 
    Return Loss1> 32.26dB
Frequency Range 21 to 4GHz
    VSWR2≤ 1.1 
    Return Loss2> 26.44dB
Frequency Range 34 to 10GHz
    VSWR3≤ 1.2 
    Return Loss3> 20.83dB
Frequency Range 410 to 12.4GHz
    VSWR4≤ 1.25 
    Return Loss4> 19.08dB
Min. Return loss vs. Frequency


Select graph


 
Mechanical dataJump to [Top] 
Width 16.9mm
Height 16.9mm
Length Coaxial 54.8mm
Environmental and general dataJump to [Top] 
Weight 0.05kg
Material dataJump to [Top] 
Resistor Substrate MaterialBeryllium Oxide  WARNING: Beryllia Ceramic Inside! 

DO NOT sand, scrap or tamper with. Dispose in accordance with all relevant regulations.
SMA - jack (female) – Interface
Piece partBase materialPlating
Center contactCopper Beryllium AlloyGold Plating (without Nickel underplating)
Outer contactCopper Beryllium AlloyGold Plating (without Nickel underplating)
InsulatorPFA / PTFE 
Heat sink bodyAluminium 
TestsJump to [Top] 
Following tests have been passed successfully. For any details please contact your nearest HUBER+SUHNER representative.
Test descriptionSpecification / Paragraph / Method
privacy policy | disclaimer © 2009 HUBER+SUHNER